A stainless steel tube k 14 wmk used to transport a chilled

Assignment Help Mechanical Engineering

Reference no: EM13644419

A stainless steel tube (k= 14 w/m*k) used to transport a chilled pharmaceutical, has an inner diameter of 36 mm and a wall thickness of 2 mm. The pharmaceutical and ambient air are at temperatures of 6 C and 23 C, respectively, while the corresponding inner and outer convention coefficients are 400 W/m^2K and 6 W/m^2 K respectively.

A). What is the heat transfer rate per unit of tube length?

B). What is the heat transfer rate per unit length if a 10 mm thich layer of calcium silicate insulation (k= 0.05 w/m*k) is applied to the outer surfac of the tube?

Reference no: EM13644419

Questions Cloud

For the forgoing conditions and a fin unit width calculate : a straight fin of rectangular cross section fabricated from an aluminum alloy k 185wmk has a base thickness of t3mm and

A sample of 64 observations is selected from a normal : a sample of 64 observations is selected from a normal population.the sample mean is 215 and the sample standard

For a t random variable with 5 degrees of freedom find a : for a t random variable with 5 degrees of freedom find a such that pt gt a .975. answer to three decimal places and

A spring with a mass on the end of it hangs in equilibrium : a spring with a mass on the end of it hangs in equilibrium a distance of 0.420 m above the floor. the mass is pulled

A stainless steel tube k 14 wmk used to transport a chilled : a stainless steel tube k 14 wmk used to transport a chilled pharmaceutical has an inner diameter of 36 mm and a wall

If the sealed-tube manometer shown below had a height : if the sealed-tube manometer shown below had a height difference of 20.5 inches between the mercury levels what is the

For these conditions what is the force in units of lbf and : consider a subsonic engine inlet i.e. a diffuser with an inlet area of 2300 in2 and an exitinlet area ratio of 1.44.

Calculate the test statistic x3o to test the manufacturers : a manufacturer of precision measuring instruments claims that the standard deviation in the use of the instruments is

A spring has a spring constant k 14 875 nm if the spring is : a spring has a spring constant k 14 8.75 nm. if the spring is displaced 0.150 m from its equilibrium position what is

User Account

All Pages