A slab of a thermal insulator with a cross-sectional area

Reference no: EM13322564

A slab of a thermal insulator with a cross-sectional area of 120cm2 is 3.00cm thick.Its thermal conductivity is 8.00×10-2W/(m⋅K) ; If the temperature difference between opposite faces is 77.0°C, how much heat flows through the slab in 1 day?

Reference no: EM13322564

Questions Cloud

Determine the tension in the left cord : A mass m1 = 15.0 kg and a mass m2 = 11.5 kg are suspended by a pulley that has a radius of 10.2 cm and a mass of 3 kg, determine the tension in the left cord

What is the magnitude of the net magnetic field : A long horizontal wire carries 26.0A of current due north. The Earth's field 22.0cm due west of the wire points north but downward, 47° below the horizontal, and has magnitude of 5.0×10-5T.

What is the speed of the wave in the medium : You can excite waves in a string of length 1.142 m fixed at both ends. You started from an arbitrarily low frequency and increased it slowly. What is the speed of the wave in the medium in m/s

Write a mips program guess : Write a MIPS program guess which tries to guess what number you have chosen in as few guesses as possible. It can only ask you whether the number is less than some other number.

A slab of a thermal insulator with a cross-sectional area : A slab of a thermal insulator with a cross-sectional area of 120cm2 is 3.00cm thick

Describe the change in flux : describe the change in flux through and the induced current in a loop of wire rotated in a uniform magnetic field

Explain oxygen is more electronegative than nitrogen : Oxygen is more electronegative than nitrogen, fluorine is more electronegative than the other halogens. Fluoride is a stronger field ligand than the other halogens, but ammonia is a stronger field ligand than water. Why

Using the division algorithm : Using the division algorithm where the 8 bit dividend is put into a 16 bit register R and the divisor is put into an 8 bit register D, and the result is that the quotient is in the lower half of R and the remainder is in the upper half of R, divid..

Determine the maximum tensile and compressive stresses : A beam of w16 X 50 section has a simple span of 20 ft. The beam is subjected to a uniform load of 2 kips/ft and an axial tensile force of 10 kips. Determine the maximum tensile and compressive stresses in the beam

User Account

All Pages