User Account

All Pages

A pump steadily draws water from a pond at 20 lbs pressure

Assignment Help Mechanical Engineering
Reference no: EM13625345

A pump steadily draws water from a pond at 20 lb/s. Pressure at the inlet is 14.7 psi ,the temperature is 68 degrees F and the velocity is 10 ft/s. At the exit the pressure is 20 psi, temperature is the same at 68 degrees, and the velocity is 40 ft/s. The outlet is 50 ft above the inlet. Determine the power required by the pump in both Btu/s and hp. Local gravity is 32.0 ft/s^2.

Reference no: EM13625345

Questions Cloud

Given a tank with 60 cm of crude oil sg086 on top of 200 cm : given a tank with 60 cm of crude oil sg0.86 on top of 200 cm of water both at 50 degrees c. barometric atomospheric
A frac12 -in-diameter unf sae grade 52 bolt with rolled : a frac12 -in-diameter unf sae grade 5.2 bolt with rolled threads is preloaded to 80 of its proof load when clamping a
On an ice rink a 3 kg object initially moving a speed of 5 : on an ice rink a 3 kg object initially moving a speed of 5 ms strikes a 6 kg object initially at rest. afterwards the
What are the normal and static frictional forces on the bar : a 2m long uniform bar that weighs 10n is used to hold a 3n sign. a cable is attached to one end of the bar and the
A pump steadily draws water from a pond at 20 lbs pressure : a pump steadily draws water from a pond at 20 lbs. pressure at the inlet is 14.7 psi the temperature is 68 degrees f
A househusband is steaming beef for his family in a pan : a househusband is steaming beef for his family in a pan with a surface area of 23.544 cm2 that is covered with i a 50 g
Consider an experiment where we study the ability of snails : consider an experiment where we study the ability of snails tohold firmly onto a smooth substrate. we would like to
The initial velocity of the clay is 225 ms directed : a weather vane initially at rest has a moment of inertia of 0.104 kg middot m2 about its axis of rotation. a 47.0 g
A space station in the form of a large wheel 772 m in : a space station in the form of a large wheel 77.2 m in diameter rotates to provide an artifical gravity of 5.1 ms2 for

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What is the velocity of the collar

The system is at rest in the position shown, with the 12-lb collar A resting on the spring (k = 20 lb/ft), when a constant 30-lb force is applied to the cable. What is the velocity of the collar when it has risen 1 ft? The collar is attached to th..

  Using a finite-difference method with a space increment of

a straight fin of uniform cross section is fabricated from a material of thermal conductivity 50 wmk thickness w6mm and

  The length of pipe is 30 m and contains two elbows with

a solution of ethanol is pumped to a vessel 25 m above a reference level through a 25 mm inside diameter steel pipe at

  An iron-carbon alloy gear is being hardened by

an iron-carbon alloy gear is being hardened by carburization at 1000 oc. calculate the time in hours necessary to

  The discharge temperature is 400 c a heat loss of 10 kw is

a steam compressor is used to increase the pressure of saturated water vapor at 1000 kpa to 1500 kpa. the flow rate is

  Determine the magnitude of its acceleration

If the motorcycle has a deceleration of a_t = -(0.001s);{rm m}/{rm s}^{ 2 } and its speed at position A is 18 m/s, determine the magnitude of its acceleration when it passes point B.

  Determine the flight angle that maximizes the flow rate

The die characteristic is Q_x = 0.0015p where p is the head pressure in psi. Determine the flight angle that maximizes the flow rate Q_x and graph it.

  What is the enthalpy change of the fluid from the initial

a piston cylinder device contains 1 kg of liquid water at 200kpa and 25oc. heat is added to the water in the cylinder

  Finally compressed at the constant pressure to the initial

a piston-cylinder device contains 0.15kg of air initially at 2mpa and 350oc. the air is first expanded isothermally to

  Pressures change from 325 k and 125 kpa to 500 k and 300

during actual expansion and compression processes of gases pressure and volume are often related by pvn c where n and

  After a load of 236 kn is applied the gage length increases

a carefully controlled tensile test is conducted on a metal alloy specimen. the original diameter is 10 mm and the gage

  What is the pressure in the tank

If 300 Kg of air is pumped into a previously empty 100 m^3 tank, and the temperature of the air in the tank is 25 deg C, then what is the pressure in the tank in N/m^2?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd