User Account

All Pages

A piston-cylinder device initially contains

Assignment Help Mechanical Engineering
Reference no: EM13704722

A piston-cylinder device initially contains 0.4 m3 of air at 100 kPa and 80°C.The air is now compressed to 0.1 m3 in such a way that the temperature inside the cylinder remains constant. Determine the work done during this process.

Reference no: EM13704722

Questions Cloud

Determine the initial temperature of the h2o : Rigid steel tank with a volume of 1 m3 contains 2 kg of H2O initially at 400 kPa. Determine the initial temperature of the H2O
Determine the initial temperature : A frictionless piston-cylinder contains 3.0 kg of H2O and is initially at 300 kPa. The initial volume is 1.0 m3. The water is heated until the temperature is 300 C. If the volume within the system reaches 1.5 m3, the piston hits a set of stops and is..
Find the damping coefficient : A 90 kg pilot ejects from a plane and reaches a steady state velocity of 30 m/s with one parachute open. Neglect any air drag force on the pilot and assume that the air drag force can be modeled as an ideal damper i.e. linearly proportional to the ve..
Closed systems-control volume systems-transient systems : Explain whether the following situations and should be modeled as closed systems, control volume systems, or transient systems. Convert the following temperatures to °F, °C, K, R (4 pts) a. 98.6 °F b. 298 K c. 5715 °F e. 100 °C. Convert the following..
A piston-cylinder device initially contains : A piston-cylinder device initially contains 0.4 m3 of air at 100 kPa and 80°C.The air is now compressed to 0.1 m3 in such a way that the temperature inside the cylinder remains constant. Determine the work done during this process.
Atomic radius and atomic weight of niobium : Atomic radius and atomic weight of niobium are 0.143nm and 92.91 g/mol respectively. Calculate Nb density assuming (1) FCC, and (b) BCC crystal structures. Compare the values with t the available Nb density from the textbook (Materials Science and En..
Calculate the static pressure of moving mass of air : Calculate the static pressure (in psi) of a moving mass of air, if the ambient air pressure is 1 atms (14.69 psi) and the velocity of the moving mass of air is 100 feet/sec.
What is coefficient of lift of an airplane weighing : What is coefficient of lift (CL) of an airplane weighing 2200 lbs with wing surface area of 150 ft2, in steady level flight, at sea level density (0.0023 slugs/ft3), flying at 160 kts?
A cylindrical container has a diameter : A cylindrical container has a diameter of 0.5 m and a height of 1 m. If it is to be filled with a liquid having a specific weight of 2000 n/m3, how many kg of this liquid must be added?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Finite element analysis fea is a modern-day tool in the

finite element analysis fea is a modern-day tool in the analysis of structural mechanics fluid dynamics and heat

  The external surrounding air at 300 k has a convective

a longitudinal aluminum fin k 230 wmk is attached to a copper tube having an outside radius of 0.04m. the length of

  The wear out of a machine is normally distributed with 90

the wear out of a machine is normally distributed with 90 percent of the failures occurring between 200 and 270 hr of

  The static design yields a mass of 50kg and that the bar be

a bar of negligible mass fixed with a tip mass forms part of a machine used to punch holes in a sheet of metal as it

  At what rate is the circumference of a wave changing

a stone is dropped into a lake causing circular waves whos radii increase at a contant rate of .5 m/s at what rate is the circumference of a wave changing when its radius is 4 meters?

  If a mass of cobalt is replaced by a compound with a

if a mass of cobalt is replaced by a compound with a density of 4.13 mgm3 and results in a mass reduction of 0.79 kg

  Steam entering a nozzle has an enthalpy of 3200 kjkg and

steam entering a nozzle has an enthalpy of 3200 kjkg and its intial velocity is 75 ms. the exit stream has an enthalpy

  Determine the pressure kpa at the start and end of

six kilograms of carbon dioxide in a piston-cylinder device execute a carnot cycle consisting of the following four

  The coefficient of performance of the air-conditioning unit

an air-conditioning unit takes in outside air at 46oc and 100 kpa having a relative humidity of 16. the air is cooled

  A heat engine absorbes 25 mw from a 400 c combustion

a heat engine absorbes 25 mw from a 400 c combustion chamber and rejects 15 mw to the atmosphere at 30 c. find the

  Silicon carbide sic has a specific gravity of 31 gcm3 a

silicon carbide sic has a specific gravity of 3.1 gcm3. a sintered sic part is produced occupying a volume of 500 cm3

  In a thin-walled cylinder loaded with internal pressure

In a thin-walled cylinder loaded with internal pressure, show how a single-element strain gage in hoop direction can be used to established the hoop and axial stresses.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd