A monatomic gas at a pressure of 12 kpa and volume 1 m3

Assignment Help Physics
Reference no: EM13632030

A monatomic gas at a pressure of 12 kPa and volume 1 m^3 undergoes a thermodynamic cycle described by three processes:

i) It expands isobarically to 4 m^3, ii) it decreases in pressure isovolumetrically to 3 kPa, and iii) decreases in volume isothermally back to 1 m^3. What is the work done by this cycle?

a) 3.68 kJ b) 10.8 kJ c) 19.4 kJ d) 29.6 kJ e) 38.5 kJ

Reference no: EM13632030

Questions Cloud

A torque t is imposed at the ends the maximum shearing : the composite shaft consists of three sections 1 a solid brass core 2 a middle steel tube and 3 an outer aluminum tube.
A four-cylinder four-stroke 22-l gasoline engine operates : a four-cylinder four-stroke 2.2-l gasoline engine operates on the otto cycle with a compression ratio of 10. the air is
A 25cm length of 026mm diameter nichrome wire is welded : a 25cm length of 0.26mm diameter nichrome wire is welded into a circular loop. the loop is placed between the poles of
An equiprobable approach goodness of fit test with 9 cells : an equiprobable approach goodness of fit test with 9 cells for sample data that is normally distributed with a mean of
A monatomic gas at a pressure of 12 kpa and volume 1 m3 : a monatomic gas at a pressure of 12 kpa and volume 1 m3 undergoes a thermodynamic cycle described by three processesi
How would the natural frequency be analyzed assume that the : a cantilevered steel pipe tower 80 m tall is being considered for a new wind turbine. the weight of the turbine is 3400
Let w1 and w2 be independent geometric random variables : let w1 and w2 be independent geometric random variables with parameters 0.2 and 0.4.
Estimate the average life expectancy in the united states : the average life expectancy in the united states l has been rising steadily over the past few decades as shown in the
Consider a 1000-w iron whose base plate is made of : consider a 1000-w iron whose base plate is made of 0.5-cm-thick aluminium alloy 2024-t6 p2771 kgm3 and cp 875 jkg c.

Reviews

Write a Review

Physics Questions & Answers

  Determine the three longest wavelengths

A film of MgF2 (n = 1.38) having thickness 1.68 10-5 cm is used to coat a camera lens. What are the three longest wavelengths that are intensified in the reflected light

  Find the final magnitude of the carousel''s angular velocity

A playground merry-go-round has a radius of 3.0 m and a rotational inertia of 600 kg·m^2. find the final magnitude of the carousel's angular velocity

  Estimate what is the acceleration of the masses

Two blocks are resting on a horizontal surface. The blocks are in contact with each other and a horizontal force of300 N is pushing on the left block which is m1 ontom2 which is on the right. What is the acceleration of the masses

  You can calculate your reaction time from the distance the

a meter stick is held vertically above your hand with the lower end between your thumb and first finger. on seeing the

  Compute how long is the wire

A current of 0.80A flows through a copper wire 0.50mm in diameter, How long is the wire in km

  Obtain how long is the arm of the centrifuge

In a large centrifuge used for training pilots and astronauts, a small chamber is fixed at the end of a rigid arm that rotates in a horizontal circle. obtain How long is the arm of the centrifuge

  What decimal fraction of its electrons has it lost

A 3.0 g. copper penny has a positive charge of 0.52 millicoulombs. What decimal fraction of its electrons has it lost

  What are the volume and linear charge densities

What are the volume and linear charge densities.

  What was the average acceleration of the particle

At a certain time a particle had a speed of 84 m/s in the positive x direction, What was the average acceleration of the particle during this 2.7 s intervl

  What is the distance from the horizontal top surface

A cube of wood having an edge dimension of 20.0 cm and a density of 650 kg/m3 floats on water. What is the distance from the horizontal top surface of the cube to the water level

  What is the strength of the induced electric field on circle

A uniform magnetic field in a region of space changes at a rate of 5.000e-3 T/s. What is the strength of the induced electric field on a circle

  Illustrate at what point does it have its max speed

When the cannon is fired, the ball moves 15.3 cm through the horizontal barrel of the cannon, and there is a constant frictional force of 0.0322 N between the barrel and the ball. Illustrate at what point does it have its max speed?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd