A methanol fuelled turbocharged north american racing

Assignment Help Mechanical Engineering
Reference no: EM13633241

A methanol fuelled, turbocharged, north american racing series engine has the following specification:

Four stroke

Engine swept volume: 2.65 litres

Max engine speed = 15385 rpm

Engine inlet manifold and absolute temperature and pressure: 135.5 kPa and 300 K

Engine volumetric efficiency of 100%

Fuel/air ratio by mass = 0.175

Lower heating value, Qlhv = 20 MJ/kg

Overall thermal efficiency = 30%

Find the engine power output at max engine speed.

Reference no: EM13633241

Questions Cloud

The intensity in wm2 of one sound is 694 times as great as : the intensity in wm2 of one sound is 6.94 times as great as the intensity of another sound. relative to the quieter
Compute the heat loss per one meter of pipe length now if : a pipe of negligible thickness has a hot fluid flowing inside it. it has a diameter of 0.6 m and a surface temperature
By what factor does the rate of the reaction with the : by what factor does the rate of the reaction with the followingrate law change if the concentrations of no2 andcl2 are
What voltage would you expect based on the joule tomson : what voltage would you expect based on the joule tomson coefficient value for co2 if op amp is set to 100 for a
A methanol fuelled turbocharged north american racing : a methanol fuelled turbocharged north american racing series engine has the following specificationfour strokeengine
What volume of h2 could be produced at atemperature of 13 : 1 what is the molar mass of a substance that is 22.3 n bymass and one molecule contains 2 nitrogen atoms?2 what is the
On october 21 2001 ian ashpole of the united kingdom : on october 21 2001 ian ashpole of the united kingdom achieved a record altitude of 3.35 km 11 000 ft powered by 600 toy
Determine a complete set of independent reactions for this : a chemically reactive system contains the following species in the gas phase nh3 no no2 o2 and h2o. determine a
You are considering buying a hybrid car but are skeptical : you are considering buying a hybrid car but are skeptical of the manufacturers claims. one model uses a ring-shaped

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A system consists of liquid water in equilibrium with a

a system consists of liquid water in equilibrium with a gaseous mixture of air and water vapor. how many phases are

  What is the temperature at the initial state state 1 what

an unconstrained pistoncylinder assembly with a massless piston is oriented upright in an environment in which the

  Write down the continuity equation navier-stokes equations

a wire of radius ri is coated by a process described above. it is fed to a reservoir filled with a newtonian fluid with

  A clock is slow such that it falls behind 152 min in every

a clock is slow such that it falls behind 15.2 min in every hour. calculate the angular velocity of its second hand the

  If the elevation points a and b relative to the elevation

a contractor is required to prepare a soil surface so that its planar and the normal direction to the surface is within

  What sets of planes diffract the x-rays

Titanium in the BCC structure has a radius of 0.1423 nm.

  Maximum normal stress and maximum shear stress direction

an element of material is subjected to the following state of stress.sigmax-40 sigmay100 sigmaz30tauxy-50 tauyz12

  Find the lift and drag per meter span acting on the airfoil

Consider two-dimensional flow over the double-wedge airfoil shown. Find the lift and drag per meter span acting on the airfoil and sketch the flow pattern. Find the pressure acting on all surfaces.

  Determine the final temperature of the water use the

a closed well-insulated tank contains 0.15 kg of liquid water. the tank base is a copper plate of mass 0.25 kg that

  A tank whose volume is 001 m3 initially evacuated a pinhole

a tank whose volume is 0.01 m3 initially evacuated. a pinhole develops in the wall and the air from the surroundings at

  What is the upward force on the glass as a result of

a glass tube is inserted in mercruy. what is the upward force on the glass as a result of surface effects? constant

  Te experimental data for the process indicates that pv165

an engine undergos an expansion process that has an initial pressure of 1000 psia and volume of 0.008 ft3. the volume

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd