A meter stick is held vertically with one end on the floor

Assignment Help Physics
Reference no: EM13651038

A meter stick is held vertically with one end on the floor and is then allowed to fall. Find the speed of the other end just before it hits the floor, assuming that the end on the floor does not slip. (Hint: Consider the stick to be a thin rod and use the conservation of energy principle.)

Reference no: EM13651038

Questions Cloud

What fraction of the hose opening did you block : You are watering your lawn with a hose when you put your fingerover the hose opening to increase the distance the water reaches.If you are pointing the hose at the same angle, and the distancethe water reaches increases by a factor of 4, what frac..
Equilibrium in a uniform horizontal electric field : A poitn charge (m=1 g) at the end of an insulating string of length55 cm is observed to be in equilibrium in a uniform horizontalelectric field of 12000 N/C where the pendulum's position is as shown in the figure, with the charge 12 cm above the l..
Alligator waits for prey by floating with only the top : Lurking alligators. An alligator waits for prey by floating with only the top of its head exposed, so that the preycannot easily see it. One way it can adjust the extent of sinkingis by controlling the size of its lungs.
Combination rotates around rotation axis with angular speed : In the figure, two particles, each with mass m = 0.79 kg,are fastened to each other, and to a rotation axis at O,by two thin rods, each with length d = 6.0 cm and massM = 1.2 kg. The combination rotates around the rotation axis with angular speed ..
A meter stick is held vertically with one end on the floor : A meter stick is held vertically with one end on the floor and is then allowed to fall. Find the speed of the other end just before it hits the floor, assuming that the end on the floor does not slip.
Essentially a thin hoop with radius : A 33.0 kg wheel, essentially a thin hoop with radius 1.00 m, isrotating at 295 rev/min. It must be brought to a stop in 11.0 s.(a) How much work must be done to stop it?(b) What is the required average power?
Blocks speed after crossing the rough patch : A 1.75 kg block at rest on a ramp of height h. When the block isreleased, it slides without friction to the bottom of the ramp, andthen continues across a surface that is frictionless except for arough patch of width 10.0 cm that has a coefficient..
Simple model of a wii fit balance board : Let's us a simple model of a Wii Fit balance board with two forcemeters, one at the left edge and one at the right edge. The width of the board is 0.45 meters. If the left sensor reads F1= 300 N and the right sensor readsF2 = 275 N.
Charged particle travelson a circular path whose radius : A charged particle moves through a velocity selector at a constant speed in a straight line. The electric field of the velocityselector is 3.65x10^3 N/C, while the magnetic field is 0.360 T.When the electric field is turned off, the charged partic..

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd