A massless spring is hanging vertically and unloaded

Assignment Help Physics
Reference no: EM13544731

A massless spring is hanging vertically and unloaded, from the ceiling. A mass is attached to the bottom end and released. How close to its final resting position is the mass after 1 second, given that it finally comes to rest 0.5 meters below the point of release and that the motion is critically damped?

Reference no: EM13544731

Questions Cloud

Determine the exit area of the nozzle : Steam enters a nozzle operating at steady state with p = 40 bar and T =400oC, and a velocity of 10 m/s. The steam flows through the nozzle with negligible heat transfer and no significant change in potential energy. At the exit, p2 = 15 bar and the v..
Coefficient of static friction between the ladder : An 9.0 m, 240 N uniform ladder rests against a smooth wall. The coefficient of static friction between the ladder and the ground is 0.60, and the ladder makes a 50.0° angle with the ground. How far up the ladder can an 880 N person climb before the l..
Find the initial speed of the bullet : A 7.0 g bullet is fired into a 1.5 kg ballistic pendulum. The bullet emerges from the block with a speed of 200 m/s, and the block rises to a max height of 12 cm. Find the initial speed of the bullet.
Find the tension in the lower segment of the belt : An electric motor turns a flywheel through a drive belt that joins a pulley on the motor and a pulley that is rigidly attached to the flywheel as shown in the figure below. The flywheel is a solid disk with a mass of 61.5 kg and a radius R = 0.625..
A massless spring is hanging vertically and unloaded : A massless spring is hanging vertically and unloaded, from the ceiling. A mass is attached to the bottom end and released. How close to its final resting position is the mass after 1 second, given that it finally comes to rest 0.5 meters below the po..
Distance between the centers of the wheels of a motorcycle : The distance between the centers of the wheels of a motorcycle is 150 cm. The center of mass of the motorcycle, including the rider, is 85.5 cm above the ground and halfway between the wheels. Assume the mass of each wheel is small compared to the bo..
The head of a grass string trimmer : The head of a grass string trimmer has 100 g of cord wound in a light, cylindrical spool with inside diameter 3.00 cm and outside diameter 18.0 cm as shown in the figure below. The cord has a linear density of 10.0 g/m. A single strand of the cord..
Particle moves on the x axis under the influence of a force : A particle moves on the x axis under the influence of a force, proportional to its distance from the origin, attracting it toward the origin. The particle starts from rest at x = 10 cm and reaches x = 5 cm for the first time after 2 s. Find: a. the p..
A solid cube of wood of side : A solid cube of wood of side 2a and mass M is resting on a horizontal surface. The cube is constrained to rotate about an axis AB. A bullet of mass m and speed v is shot at the face opposite ABCD at a height of 4a/3. The bullet becomes embedded in th..

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd