A magician pulls a tablecloth from under

Assignment Help Physics
Reference no: EM13542376

A magician pulls a tablecloth from under a 200 g mug located 30.0 cm from the edge of the cloth. The cloth exerts a friction force of 0.140 N on the mug, and the cloth is pulled with a constant acceleration of 2.90 m/s2. How far does the mug move relative to the horizontal tabletop before the cloth is completely out from under it? Note that the cloth must move more than 30 cm relative to the tabletop during the process.

Reference no: EM13542376

Questions Cloud

A parallel-plate capacitor with plates of area : A parallel-plate capacitor with plates of area 441 cm2 is charged to a potential difference V and is then disconnected from the voltage source. When the plates are moved 5.02 mm farther apart, the voltage between the plates increases by 81.0 Volts. W..
Calculate the tidal acceleration at the event horizon : Suppose you are old and as a last act want to see for yourself what it is to cross an event horizon (knowing you cannot come back). To get there, though, you have to survive the tidal forces.
Determine the change in the internal energy of the system : A system receives 107 joules in the form of heat energy in a specified process and it produces work of 4*10^6 joules. The system velocity changes from 10km/s to 25 km/s and its elevation changes from 20m to 12m. The mass of the system is 50 kg. Deter..
What is the total power into-out of the solenoid : A very long solenoid of radius a and height h has N closely wound turns of coil. Suppose there is an increasing current I(t) that runs through the coils. Consider a point P inside the solenoid (i.e. at r
A magician pulls a tablecloth from under : A magician pulls a tablecloth from under a 200 g mug located 30.0 cm from the edge of the cloth. The cloth exerts a friction force of 0.140 N on the mug, and the cloth is pulled with a constant acceleration of 2.90 m/s2. How far does the mug move rel..
Air which may be treated as an ideal gas : Air which may be treated as an ideal gas, is compressed from 100 kpa to 1500 kpa in a quasisatatic manner so that it obeys the relation ....pV^1.3 = constant determine the amount of work necessary to compress 100kg of air. The initial temperature ..
Determine vb of the load b after it has dropped 200 mm : A 40 kg sheave a OF RADIUS R=350 mm. and cenral radiusof gyration k=250 mm carries a 160 kg load b and is suspended by a cable and a spring of modulus k=1.2 kN/m. if the system is relased from rest in the positon show the spring is stretched 100 mm d..
Determine the magnitude and location of the maximum bending : For the beam and loading shown, write the equation of he shear and bending-moment curves and determine the magnitude and location of the maximum bending moment
Distance from the roadway to the floor of the vehicle : You are in charge of evaluating the safety (hazard) of a low water crossing. Traffic surveys show that the "Aaverage"vehicle using the crossing is semi-rectangular in shape (10 ft long, 5 ft wide, and 4.0 ft high - not including the distance from the..

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd