A house has a winter heating requirement of 30 kjs and a

Assignment Help Mechanical Engineering

Reference no: EM13630599

A house has a winter heating requirement of 30 kJ/s and a summer cooling requirement of 60 kJ/s. Consider a heat-pump installation to maintain the house temperature at 20 °C in the winter an 25 °C in the summer. This requires circulation of the refrigerant through interior exchanger coils at 30 °C in the winter and 5 °C in the summer. Underground coils provide the heat source in the winter and the heat sink in the summer. For a year- round ground temperature of 15 °C, the heat transfer characteristics of the coils necessitate refrigerant temperatures of 10 °C in winter and 25 °C in summer. What are the minimum power requirements for winter heating and summer cooling?

Reference no: EM13630599

Questions Cloud

A 100 m length of wire consists of 51 m of copper followed : a 10.0 m length of wire consists of 5.1 m of copper followed by 4.9 m of aluminum both of diameter 1.0 mm. a voltage

The top surface of the passenger car moving at a velocity : the top surface of the passenger car moving at a velocity of 70 kmh is 2.8 m wide and 8 m long. the top surface is

With the system being tested at a constant angular velocity : in an effort to eliminate out-of-balance effects on a rotating disk an in-field single plane procedure was completed.

How would i determine an expression for the interaction : consider two identical insulating spheres of radius r and uniform charge q throughout their volume. they are separated

A house has a winter heating requirement of 30 kjs and a : a house has a winter heating requirement of 30 kjs and a summer cooling requirement of 60 kjs. consider a heat-pump

Two particles a and b strike each other as shown ma 29 kg : two particles a and b strike each other as shown. ma 2.9 kg and mb 1.3 kg. just before the collision va 2i 8j ms

Plot the final bend radius as a function of initial bend : plot the final bend radius as a function of initial bend radius in bending for a 5052-o aluminum b5052-h34 aluminum c

A particle in the xy plane is attracted to the origin by a : a particle in the xy plane is attracted to the origin by a force f -kyr calculate the work done by the force as the

Gears are used to increase and decrease rotational speed : gears are used to increase and decrease rotational speed and according to this relation v ramp969amp160we can say that

User Account

All Pages