A cylindrical pressure vessel

Assignment Help Mechanical Engineering

Reference no: EM13703061

A cylindrical pressure vessel of 120 in diameter outside, used for processing rubber, is 36 ft. long. If the cylinder portion of the vessel operates at 120 psi internal pressure, what are the stresses acting on an element at the inside surface of the pressure vessel. Draw the pressure vessel large enough to show the orientation of your selected stress element with the stresses acting on it.

Reference no: EM13703061

Questions Cloud

Determine the input power in watts : A motor has a disk mounted on its shaft. The disk has a diameter of 1 foot and weighs 60 pounds. Starting from rest, the motor rotates at 350 rpm after 5 seconds. If the motor has a 92% efficiency, determine the input power in watts.

Determine the pressure at the turbine exit : A turbojet is flying with a velocity of 900 ft/s at an altitude of 20,000 ft, where the ambient conditions are 7 psia and 108F. The pressure ratio across the compressor is 13, and the temperature at the turbine inlet is 2400 R.

Natural gas having a molar analysis : Natural gas having a molar analysis of 60% methane (CH4) and 40% ethane (C2H6) enters a compressor at 340K, 6 bar and is compressed isothermally without internal irreversibilities to 20 bar. The compressor operates at steady state, the kinetic and po..

Dispute resolution : A group of neighbours in your area are fed up with a house of uni students who continue to have late night parties, disrupting the neighbourhood. You and your neighbours want to take action.

A cylindrical pressure vessel : A cylindrical pressure vessel of 120 in diameter outside, used for processing rubber, is 36 ft. long. If the cylinder portion of the vessel operates at 120 psi internal pressure, what are the stresses acting on an element at the inside surface of the..

Determine the increase in internal energy : Determine the increase in internal energy of 2 kg of argon if its temperature increases from 30C to 130C

Draw the pressure vessel large enough to show orientation : A cylindrical pressure vessel of 120 in diameter outside, used for processing rubber, is 36 ft. long. If the cylinder portion of the vessel operates at 120 psi internal pressure, what are the stresses acting on an element at the inside surface of the..

Inner surface of a horizontal cylindrical duct : Electronic components are mounted on the inner surface of a horizontal cylindrical duct whose inner diameter is 0.2 m, as shown in Fig. P6.96. To prevent overheating of the electronics, the cylinder is cooled by a stream of air flowing through it and..

Element at the inside surface of the pressure vessel : A cylindrical pressure vessel of 120 in diameter outside, used for processing rubber, is 36 ft. long. If the cylinder portion of the vessel operates at 120 psi internal pressure, what are the stresses acting on an element at the inside surface of the..

User Account

All Pages