A coil is connected to a 60 hz ac generator with a peak

Assignment Help Physics

Reference no: EM13631772

A coil is connected to a 60 Hz ac generator with a peak emf equal to 80 V. At this frequency the coil has an impedance of 14 and a reactance of 12 .

(a) What is the peak current in the coil?

(b) What is the phase angle between the current and the applied voltage?

(c) A capacitor is put into series with the coil and the generator. What capacitance is required so that the current is in phase with the generator emf?

(d) What then is the peak voltage measured across the capacitor?

Reference no: EM13631772

Questions Cloud

To deposit 14000 j of heat in the house the heat pump : the water in a deep underground well is used as the cold reservoir of a carnot heat pump that maintains the temperature

If the 160-lb person jumps directly off the back of the : two people 160-lb and 120-lb respectively are in a boat that is moving forward at 4 fts. if the 160-lb person jumps

How long would a 290 kw space heater have to run to put : how long would a 2.90 kw space heater have to run to put into a kitchen the same amount of heat as a refrigerator

Suppose telephone calls arrive at an emergency hotline at a : suppose telephone calls arrive at an emergency hotline at a rate of 5 per hour and you begin monitoring calls at time

A coil is connected to a 60 hz ac generator with a peak : a coil is connected to a 60 hz ac generator with a peak emf equal to 80 v. at this frequency the coil has an impedance

Calculate the ratio of the number of primary windings of : the primary windings of a transformer which has an 80 efficiency are connected to110 v ac. the secondary windings are

A worm gear set has a velocity ratio of 005 the worm has : a worm gear set has a velocity ratio of 0.05. the worm has two teeth a lead of 3 in. and a pitch diameter of 1.5in.

Assume a wind turbine with a hub 50 meters above the ground : assume a wind turbine with a hub 50 meters above the ground a rotor diameter of 50 meters and wind conversion efficiecy

A rigid 10 m3 tank contains water initially at 120oc with : a rigid 1.0 m3 tank contains water initially at 120oc with 50 liquid and 50 vapor by volume. a pressure-relief valve on

User Account

All Pages