A centrifugal pump located above an open water tank is used

Assignment Help Mechanical Engineering

Reference no: EM13631149

A centrifugal pump, located above an open water tank, is used to draw water using a suction pipe (8 cm diameter). The pump is to deliver 20oC water at a rate of 0.02m3/s. The pump manufacturer has speci?ed a NPSHR of 3 m. A food process equipment located between the suction and the pump causes a loss of Cf = 15. All other losses may be neglected. Calculate the maximum height the pump can be placed above the water level in the tank without cavitation.

Reference no: EM13631149

Questions Cloud

Calculate and compare the electron densities of a piece of : calculate and compare the electron densities of a piece of aluminum 1 cm thick and a piece of iron of the same density

A light truck weighs 3100 lb and is rated at 30 miles per : a light truck weighs 3100 lb and is rated at 30 miles per gallon for a 60 mph highway driving on level ground. how much

A neutron passes two points 10 meter apart in 10 : a neutron passes two points 1.0 meter apart in 1.0 microsecond. calculate the neutrons energy in units of both joules j

A particular material has a dielectric constant of 17 and a : a particular material has a dielectric constant of 1.7 and a dielectric strength of 14.0 mvm. if this material is used

A centrifugal pump located above an open water tank is used : a centrifugal pump located above an open water tank is used to draw water using a suction pipe 8 cm diameter. the pump

Aple juice at 20c is siphoned from a large tank using a : apple juice at 20c is siphoned from a large tank using a constant-diameter hose. the end of the siphon is 1m below the

At the end of year 5 repair costs are 4000 and increase 500 : a new product tracking machine costs 130000 and will have a 15000 salvage value at the end of 10 years. annual repair

Two spaceships approach earth with equal speeds as measured : two spaceships approach earth with equal speeds as measured by an observer on earth but from opposite directions. a

This process takes place at constant pressure and the heat : 10 kg of water at 20 degrees c converted to ice at -10 degrees c by being put in contact with a reservoir at -10

User Account

All Pages