A 200mm long 10mm dia tensile sample experienced plastic

Assignment Help Mechanical Engineering

A 200mm long, 10mm dia. tensile sample experienced plastic deformation at a strain of 0.01. The applied load was 78.5 kN.

• What is the elastic modulus of the material?

• By how many mm did sample elastically deform?

Looking at the Ni-Cu phase diagram answer the following questions.

• At what temperature is a Cu (20%) - NI(80%) fully solid?

• What phases are present at 1300°C and 50%Cu50%Ni?

Draw and label an engineering stress-strain diagram for a brittle metal.

The revenues of the top eleven personal computer : the revenues of the top eleven personal computer manufacturers are given in hundred millions15 17 23 26 27 35 72 88 91

Assuming that the maximum power output is proportional to : the maximum power output capability of an engine decreases with altitude because the air density and hence the mass

A 9 m3 tank has two sections separated by a membrane both : a 9 m3 tank has two sections separated by a membrane both of which contain nitrogen gas. the nitrogen in section a has

A circular coil of 20 turns and radius 10 cm is placed in : a circular coil of 20 turns and radius 10 cm is placed in a uniform magnetic field of 0.10 t normal to the plane of the

A 200mm long 10mm dia tensile sample experienced plastic : a 200mm long 10mm dia. tensile sample experienced plastic deformation at a strain of 0.01. the applied load was 78.5

A uniform magnetic field of 15 t exists in a cylindrical : a uniform magnetic field of 1.5 t exists in a cylindrical region of radius10.0 cm its direction parallel to the axis

Both a gage and manometer are attached to a gas tank to : both a gage and manometer are attached to a gas tank to measure its pressure. if the reading on the pressure gage is 80

If the refrigerant flow rate is cut to 50 kgs but it still : refrigerant 134a at 10 bars 38oc flows at 10.0 kgs through a heat exchanger leaving at 9.0 bars and 80oc. it exchanges

What is the force per unit length between the wires if they : the wires which connect the battery of an automobile to its starting motor carry a current of 300 a for a short time.